LG LM7600 Series Calibrations and Picture Settings
by Robert Wiley, Senior Editor
Calibrated Picture Settings: We utilized to 2-point white balance control to get close to D6500K without having to go the full 20-point white balance route. After much testing with the LED local dimming feature, we decided it was better left to the Off position. The Picture Mode settings and calibration controls for the LM7600 are very complete. These settings still allowing plenty of backlight for a well-lit picture. You will find these settings show a bit more luminance and better dark shadow detail than the standard Cinema setting. Turn the backlight up a bit for brighter room situations.
Following is a little run down of the different settings:
- Standard - lots of blue push - vibrant
- Vivid - uses too much contrast and everything else - especially edge enhancement - not recommended
- Cinema - Very good setting for movies
- Expert 1 and 2 - Can be programmed by the user
- Game - Specially designed for better gaming and the dual gaming mode setting for fast action
Calibrations:
Post Calibration Settings: Gamut
Energy Saving | OFF |
Picture Mode | ISF Expert 1 |
Backlight | 41 |
Contrast | 86 |
Brightness | 57 |
H Sharpness | 25 |
V Sharpness | 25 |
Color | 58 |
Tint | G6 |
Super Resolution | OFF |
LED Local Dimming | OFF |
Dynamic Contrast | OFF |
Noise Reduction | OFF |
MPEG Noise Reduction | OFF |
Black Level | LOW |
Color Gamut | STANDARD |
Edge Enhancement | OFF |
Color Filter | OFF |
Color Temp | WARM |
GAMMA | 2.2 |
Method | 2 Point IRE |
Pattern | OUTER |
Color Management System White Balance
Color | Tint | Luminance | |
Red | 1 | 5 | 2 |
Green | 3 | 6 | 0 |
Blue | -10 | -8 | 2 |
Yellow | -2 | -1 | 0 |
Cyan | 3 | 8 | 1 |
Magenta | -3 | 0 | 0 |
|